File ▸ Options… Changes apply at once and are kept in your browser.
| Section | Setting | Default |
|---|---|---|
| Pricking defaults | Mode (Auto pitch / Fixed pitch / Number of holes): the Stitching tool's Spacing, so changing either changes both | Fixed pitch |
| Corners (Hole on every corner / All junctions / Uniform) | Hole on every corner | |
| Corner angle threshold | 160° | |
| Saving | Save to the project file automatically, 2 seconds after the last change | on |
| Editing | Add to the selection without holding Ctrl | off |
| Bevel: pick several lines without holding Ctrl | on | |
| Show pattern check warnings | on | |
| Show scale and rotate handles | on | |
| Show the position and size panel | on | |
| Scale around the centre | off | |
| Invert the Y axis (display only) | off | |
| Trim the undo history when memory runs short | on | |
| Undo steps always kept | 20 | |
| Print calibration (this printer) | Measured X ruler, Measured Y ruler | 100 mm |
| Print margins | Left, Top, Right, Bottom (the same as in the print dialog) | 0 |
| Box stitch | Box stitch: how far to look for the matching line | 100 mm |
| Auto pitch parameters | Force-fit the last hole (Auto pitch and Number of holes; Fixed pitch never forces one) | on |
| Attempts | 50 | |
| Precision | 0.001 mm | |
| End tolerance | 0.1 mm | |
| Stitch preview | Colour cycle length (multicolour thread) | 1260 mm |
| Leather thickness | 2 mm | |
| Colour at the first hole (0–1) | 0.5 | |
| Zoom & scroll | Arrow keys move the view, not the drawing | on |
| Length unit | Millimetres / Inches | Millimetres |