- Unit: millimetres or inches, in File ▸ Options… ▸ Length unit. Everything you type and everything shown follows it; files always store millimetres.
- Arithmetic: every number box accepts a sum:
100/3,2*25.4,40+3.5. Press Enter or click elsewhere to apply; Esc puts the old value back. - Lengths in the tool options and dialogs are measured in the current unit; angles are in degrees.
Start here
Numbers and units: millimetres or inches
Millimetres or inches, and sums typed into any number box.
Free to use
Try it as you read.
Open PatinaCAD in another tab and follow along with the demo card holder, or start a pattern of your own.